System requirements: Windows PC with NetFramework 4.0 or higher and Windows XP - Windows 10 in 32/64bit mode. This software is only suitable for Windows PC's.
Wheel holder for Fanatec steering wheels with and without quick release. The holder is simply mounted on the wall with 2 screws and can be used with or without the lettering Plate. To attach the holder to an AluRig we recommend to combine the holder with the corresponding rail glider (Art.-No.:241262398).
This adapter is designed to attach the wheel holder to the AluRig as well. Of course you can also use the single metal gliders which are available for the Item profiles. But we found out that the items printed in PLA dampen much more vibration than the original metal parts.
This holder is designed to fix the AirFlow-Slave modules to an Alurig. Instead of the metal nuts that were made for aluminium Itemp profiles, we recommend the plastic glider, as this absorbs considerably more vibrations than the metal version.
Connector polarity: internal positive + (red line); external negative - (by black line); bus length: 29cm; transmission voltage: 1V-38V; Transmission current: maximum transmission 5A (12V); transmission power: maximum transmission power 60W; connector specifications: Outer diameter 5.5mm inner diameter 2.1mm; Wire material: full copper wire, low heat generation; Application of the connector: Power Line Head Transfer; GB standard interface size: outer diameter 5.5 mm inner diameter 2.1 mm, DC power extension cable
With this adapter all Fanatec handlebars with and without Quick Release can be attached to the Logitech G25/G27/G29 Base. To use the buttons of the Logitech base the corresponding cable adapter must be selected additionally to use the corresponding board for the conversion of 2 or 6 buttons as well as the shift paddles.
The adapter consists of 2 parts. 1 times the adapter part which is screwed directly onto the Logitech base. 1 time the adapter with the steering wheel mount for Fanatec handlebars which is screwed to the 1st adapter.
For anyone who is still driving an office chair and who keeps rolling the chair back and forth. 2 of these stoppers prevent the office chair from rolling.
Attention the stopper does not prevent the chair from rotating. To do this, the chair must be locked to the chair itself if this function is available.
For very smooth floors, we recommend the office chair stopper with rubber coating on the underside.
