The AirFlow Master Box is the central control unit for up to 4 AirFlow slaves, including control software for Windows XP-Win10 32/64bit. The Airflow Master has 4 separate connections for 2 x fans on the left and 2 x fans on the right. These are controlled separately. By means of the LED, the speed of the respective fans can be displayed depending on their luminosity. Optionally the LED display can be switched off. The control unit has a 'Curved Mode', so the fans are controlled alternately with more or less speed. This increases the curve feeling.

In desktop mode they can act as pure fans for cooling on the desktop and can be controlled separately via the software.

Supported games/simulators: GT-Legends, GTR, GTR2, Race07, Race-Room (all versions), IRacing, Project Cars, Project Cars 2, Assetto Corsa, and flight simulators.

Console support: PS3, PS4, XBox360, XBox-One via UDP streaming. Attention: for UDP streaming a router and a PC must be available.

ATTENTION: Since in almost every household both a 12 Volt/1Amp. Power supply and a USB A to Mini-B cable is available in almost every household, the basic package does not include either cable.

Our recommendation: Use a 12V / 2 Amp. Power supply, because there is enough power reserve to change from 2 to 4 AirFlow-Slave later.

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°.  Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)