System requirements: Windows PC with NetFramework 4.0 or higher and Windows XP - Windows 10 in 32/64bit mode. This software is only suitable for Windows PC's.
Wheel holder for Fanatec steering wheels with and without quick release. The holder is simply mounted on the wall with 2 screws and can be used with or without the lettering Plate. To attach the holder to an AluRig we recommend to combine the holder with the corresponding rail glider (Art.-No.:241262398).
This adapter is designed to attach the wheel holder to the AluRig as well. Of course you can also use the single metal gliders which are available for the Item profiles. But we found out that the items printed in PLA dampen much more vibration than the original metal parts.
This holder is designed to fix the AirFlow-Slave modules to an Alurig. Instead of the metal nuts that were made for aluminium Itemp profiles, we recommend the plastic glider, as this absorbs considerably more vibrations than the metal version.
Connector polarity: internal positive + (red line); external negative - (by black line); bus length: 29cm; transmission voltage: 1V-38V; Transmission current: maximum transmission 5A (12V); transmission power: maximum transmission power 60W; connector specifications: Outer diameter 5.5mm inner diameter 2.1mm; Wire material: full copper wire, low heat generation; Application of the connector: Power Line Head Transfer; GB standard interface size: outer diameter 5.5 mm inner diameter 2.1 mm, DC power extension cable
By using the Plate-Mod, you can move the original pedalplates up to 15mm to the left and up to 15mm to the right. By turning the Mod-Plate, you can move the original plate height up or down by 15mm.
To get around the problem of bad pot pickup and the extremely large game, this Poti-Mod was developed. The Poti-Mod improves the scanning of the potentiometers. The cap included in the set prevents further soiling of the potentiometers. In the overall result we achieve a clean 100% scanning with this Poti-Mod, which results in a much finer dosage of the movement data.
With this pedal mod, you can set the spring force to any hardness. With these plates the spring travel can be shortened by max. 20mm. The package includes 2x3mm and 2 x 2mm thick insert plates, so you can shorten each side of a pedal by up to 10mm. To shorten 20mm travel 2 packages are needed.
With this adapter all Fanatec handlebars with and without Quick Release can be attached to the Logitech G25/G27/G29 Base. To use the buttons of the Logitech base the corresponding cable adapter must be selected additionally to use the corresponding board for the conversion of 2 or 6 buttons as well as the shift paddles.
The adapter consists of 2 parts. 1 times the adapter part which is screwed directly onto the Logitech base. 1 time the adapter with the steering wheel mount for Fanatec handlebars which is screwed to the 1st adapter.
