Home

Sub Categories

Airflow

Software

Fanatec

Logitech

Thrustmaster

Frex

DIY

Alle

Track-Ir

3D-Print

There are 15 products.

Sort by:

Reference, A to Z

Sales, highest to lowest Relevance Name, A to Z Name, Z to A Price, low to high Price, high to low Reference, A to Z Reference, Z to A

filer on a row:

Showing 1-12 of 15 item(s)

Active filters

Categories: Alle
Categories: Logitech
Categories: Track-Ir

AirFlow-Master

Color:

Size:

The AirFlow Master Box is the central control unit for up to 4 AirFlow slaves, including control software for Windows XP-Win10 32/64bit. The Airflow Master has 4 separate connections for 2 x fans on the left and 2 x fans on the right. These are controlled separately. By means of the LED, the speed of the respective fans can be displayed depending on their luminosity. Optionally the LED display can be switched off. The control unit has a 'Curved Mode', so the fans are controlled alternately with more or less speed. This increases the curve feeling.

In desktop mode they can act as pure fans for cooling on the desktop and can be controlled separately via the software.

Supported games/simulators: GT-Legends, GTR, GTR2, Race07, Race-Room (all versions), IRacing, Project Cars, Project Cars 2, Assetto Corsa, and flight simulators.

Console support: PS3, PS4, XBox360, XBox-One via UDP streaming. Attention: for UDP streaming a router and a PC must be available.

ATTENTION: Since in almost every household both a 12 Volt/1Amp. Power supply and a USB A to Mini-B cable is available in almost every household, the basic package does not include either cable.

Our recommendation: Use a 12V / 2 Amp. Power supply, because there is enough power reserve to change from 2 to 4 AirFlow-Slave later.

Regular price €89.90 -25% Price €67.43

-25%

AirFlow-Slave Black (Ral 9005)

Color:

Size:

AirFlow Slave.

Each AirFlow Slave can be connected directly to the AirFlow Master (maximum 4 AirFlow Slaves) with only one connection cable. No additional cabling or power supply is required.

Each AirFlow Slave can be rotated forward/backward 90° and rotated 360°. Each AirFlow-Slave comes with a 1 meter long connection cable. (optionally it can be ordered with a 2 meter long cable)

Each AirFlow-Slave can be controlled separately as a fan in desktop mode via the software "AirFlow-Master-Control" and then serves as a pure fan module with infinitely variable speed.

ATTENTION: The AirFlow-Master Control Box is required to operate the AirFlow-Slave.

Each AirFlow-Slave is equipped with the Swiss Arctic fans PWM/PST in the size 92x92x25mm, 1800RPM, 12V with integrated control logic and high pressure performance with very low noise level at full load (1800 RPM)

Regular price €49.90 -25% Price €37.43

-25%

Cut&Go / GT-Legends

Color:

Size:

See description

System requirements: Windows PC with NetFramework 4.0 or higher and Windows XP - Windows 10 in 32/64bit mode. This software is only suitable for Windows PC's.

languages: German, Spanish, English, Dutch, Portuguese

Regular price €5.99 -100% Price €0.00

Online only
On sale!
-100%

Wheel Halter Fanatec

Color:

Size:

Wheel holder for Fanatec steering wheels with and without quick release. The holder is simply mounted on the wall with 2 screws and can be used with or without the lettering Plate. To attach the holder to an AluRig we recommend to combine the holder with the corresponding rail glider (Art.-No.:241262398).

Price €8.90

Wheel holder personal plate

Color:

Size:

Personalized writing plate for Wheel holder (241262300). You can order this plate with your name or a lettering of your choice. Max. 12 letters.

Price €3.50

AluRig Holder for Wheelholder

Color:

Size:

This adapter is designed to attach the wheel holder to the AluRig as well. Of course you can also use the single metal gliders which are available for the Item profiles. But we found out that the items printed in PLA dampen much more vibration than the original metal parts.

Price €1.50

AluRig Holder for AirFlow

Color:

Size:

This holder is designed to fix the AirFlow-Slave modules to an Alurig. Instead of the metal nuts that were made for aluminium Itemp profiles, we recommend the plastic glider, as this absorbs considerably more vibrations than the metal version.

Price €2.99

Potentiometer knob 6mm

Color:

Size:

Potentiometer knob switch cap inside 6mm outside 15mm * high 17mm

Price €0.60

hollow socket with cable 0,2m

Color:

Size:

Connector polarity: internal positive + (red line); external negative - (by black line);
bus length: 29cm;
transmission voltage: 1V-38V;
Transmission current: maximum transmission 5A (12V);
transmission power: maximum transmission power 60W;
connector specifications: Outer diameter 5.5mm inner diameter 2.1mm;
Wire material: full copper wire, low heat generation;
Application of the connector: Power Line Head Transfer;
GB standard interface size: outer diameter 5.5 mm inner diameter 2.1 mm, DC power extension cable

Price €1.15

Plate-Mod Logitech Pedal

Color:

Size:

By using the Plate-Mod, you can move the original pedalplates up to 15mm to the left and up to 15mm to the right. By turning the Mod-Plate, you can move the original plate height up or down by 15mm.

Price €3.99

copy of

Color:

Size:

To get around the problem of bad pot pickup and the extremely large game, this Poti-Mod was developed. The Poti-Mod improves the scanning of the potentiometers. The cap included in the set prevents further soiling of the potentiometers. In the overall result we achieve a clean 100% scanning with this Poti-Mod, which results in a much finer dosage of the movement data.

Price €5.99

Pedal-Mod Logitech Pedale

Color:

Size:

With this pedal mod, you can set the spring force to any hardness. With these plates the spring travel can be shortened by max. 20mm. The package includes 2x3mm and 2 x 2mm thick insert plates, so you can shorten each side of a pedal by up to 10mm. To shorten 20mm travel 2 packages are needed.

Price €2.50

Showing 1-12 of 15 item(s)

Latest posts

Blog categories

Search in blog

Archived posts

Home

Home

Sub Categories

AirFlow-Master

AirFlow-Slave Black (Ral 9005)

Cut&Go / GT-Legends

Wheel Halter Fanatec

Wheel holder personal plate

AluRig Holder for Wheelholder

AluRig Holder for AirFlow

Potentiometer knob 6mm

hollow socket with cable 0,2m

Plate-Mod Logitech Pedal

copy of

Pedal-Mod Logitech Pedale

Sign up for our newsletter

Products

Our company